Cloud-electronics PM16 Bedienungsanleitung PDF herunterladen (Seite 17)

PM4/8/12/16 & PM4/8-SA Installation and User Guide v1.0

Paging all zones

1. Press and hold the CALL ALL button; all the LEDs for enabled zones and the

BUSY LED will illuminate.

2. Make the announcement.

3. Zones may be selected/deselected during the announcement.

4. When the announcement is nished, release the CALL ALL button.

Sending a pre-recorded message to one or more zones

1. Press the ZONE button(s) for the zone(s) to which the message is to be sent;

the LEDs corresponding to the selection will illuminate. (An incorrect selection

may be cancelled with the CLEAR button.)

2. Press the MESSAGE button for the required pre-recorded message; the

associated LED will illuminate to conrm selection.

3. To broadcast the message, press and release the TALK/SEND button. The BUSY

LED will illuminate for the duration of the message.

4. Zones may be selected/deselected during the message.

NOTE: Once the message is nished, the zone and message selections may either clear

or remain set for further use, depending how the unit was congured at installation. If

they remain set, they may be cleared by pressing the CLEAR button.

NOTE: The microphone is disabled for the duration of a pre-recorded message, so you

cannot make an announcement at the same time as broadcasting a message.

Sending a pre-recorded message to all zones

1. Press the MESSAGE button for the required pre-recorded message; the

associated LED will illuminate to conrm selection.

2. To broadcast the message, press and release the CALL ALL button; the LEDs for

enabled zones and the BUSY LED will illuminate.

3. Zones may be selected/deselected during the message.

4. When the announcement is nished, the BUSY LED will go out.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Keine Kommentare

Cloud-electronics PM16 Bedienungsanleitung Seite 17