Cloud-electronics PM16 Bedienungsanleitung PDF herunterladen (Seite 13)

PM4/8/12/16 & PM4/8-SA Installation and User Guide v1.0

SD CARD

WRITE-PROTECT TAB

UNLOCK (for recording)

LOCKED

(when installed)

Filenames

SA models of the PM will recognise les of the above types with the following

lenames:

Message les: M_x.mp3 or M_x.wma

Chime les: C_x.mp3 or C_x.wma

In both the message and chime lenames, x must have a value between 1 and 8. Thus

valid message lenames are M_1.mp3 to M_8.mp3, and valid chime lenames are

C_1.mp3 to C_8.mp3 (or their *.wma equivalents). All other les on the memory

card will be ignored.

The sound le M_1.mp3 (or M_1.wma) will be played when MESSAGE button 1

is pressed; the remaining sound les correspond numerically to the other buttons in

exactly the same way.

The sound le C_1.mp3 (or C_1.wma) is always used as the pre-announcement

page chime. Pre-recorded messages may be preceded by either C_1.mp3 or

C_2.mp3 (or their *.wma equivalents). Additionally, any chime le may be assigned

to a zone group to precede a pre-recorded message. See “Chime settings – SA

models only” on page 39 for details of how to congure chime settings, and

“Assigning a chime to a zone group (SA models only)” on page 34 for details of

chime assignment to zone groups.

Filenames M_5.mp3 to M_8.mp3 and C_5.mp3 to C_8.mp3 (or their *.wma

equivalents) will be ignored by a PM4-SA.

It would be common practice to copy sound les to the memory card so that they are

either all in the root directory, or the message les in one folder in the root and the

chime les in another. These arrangements are not mandatory, and the PM-SA will correctly

retrieve the required les from any folder location on the card. However, slightly faster

operation will result by placing all sound les in the root directory.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Keine Kommentare

Cloud-electronics PM16 Bedienungsanleitung Seite 13