Cloud-electronics VTX-WM1 Bedienungsanleitung PDF herunterladen (Seite 9)

VTX-WM1 Installation Guide v1.2 9

5. Enter a suitable name for the installation

in the Site Name eld (e.g., name of the

customer and/or building or location, etc.)

6. Use of a password is recommended as it

will prevent unauthorised access to the

network conguration pages - monitoring

of amplier performance and settings is

always possible. Enter a password in the

Site Password eld. A password may

be up to 64 characters in length and will

be case sensitive.

7. If the network has a SMTP mail server,

you may set the VTX-WM1 to send email

alerts. Clicking Setup next to the Email

Target eld opens the Email Conguration

page. Enter the email address To (Target

Email), From (Sender Address), Server IP

Address and Port.

8. Click Apply to close the dialogue box.

9. Click Apply (on the Cong page) to

conrm the data entered.

Click the blue Cloud Amplier

button in the left-hand pane. This opens

the Amplier Properties page:

10. The rst eld, Unit Name, permits

the amplier itself to be named. This

is extremely useful with large systems

employing multiple ampliers. The name

may, for example, be the area of the

building where the speakers that the

amplier is driving are located. (The Unit

Name may be up to 100 characters in

length, but note it will be truncated to 16

characters for the amplier button label.)

11. If the amplier is to have an IP address

other than the default, click the Setup

button adjacent to the network

eld, which will open the Network

settings dialogue box:

12. Enter the IP address for the amplier, the

corresponding subnet mask and gateway

IP for the network in the numeric elds.

We strongly recommend that you keep

a careful record of all IP addresses used,

and also write the address in the IP space

on the VTX-WM1’s rear panel (or print a

label for this purpose).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare