Cloud-electronics DCM1 Bedienungsanleitung PDF herunterladen (Seite 35)

DCM1 & DCM1e Installation and User Guide v1.0 35

Mic Gate Enable

SELECT INPUT

Mic Gate Enable

Numeric buttons enable/disable gates

The ME-1 remote input module incorporates a noise gate

to reject unwanted background noise when the microphone

connected at the module is not in use. The Mic Gate Enable

menu function allows the noise gate to be switched on or

off. The rst four numeric buttons correspond to the four

MICROPHONE INPUTS on the rear panel; the default

setting is for the noise gates to be active, and this is indicated

by the LEDs being illuminated.

The rotary control is not used in this function.

UTILITY

Mic Gate Enable may be congured by clicking the

SYSTEM tab, and then clicking in the appropriate Mic

checkbox(es) in the Mic Gates area. Click Send

System to transmit the new setting.

System Menu

CDR Zone Setup

Zone 1

Stereo X

Edit Input Label

Input 1

Edit Zone Label

Zone 1

Edit Group Label

Group 1

Set Key

1234

RS232 Baud Rate

9600

RS232 Flow

No Flow

Power Up Mode

Factory

Save Defaults

Update Firmware

Reset Mixer

CDR Zone Setup

SELECT INPUT

CDR Zone Setup

Numeric buttons select Zone

The CDR Zone Setup menu function lets the operator put

the CDR-1s in a system into Engineer Mode. In this mode,

per-Zone output EQ can be adjusted locally, in the zone itself.

This permits much faster and easier optimisation of the sound

as the adjustment is made from the CDR-1(s) rather than

from the DCM1.

The eight numeric buttons correspond to the eight Zones;

select the Zone(s) where EQ is to be adjusted by pressing

the appropriate key(s). The default is for EQ Setup Mode to

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 78 79

Kommentare zu diesen Handbüchern

Keine Kommentare

Cloud-electronics DCM1 Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Cloud-electronics DCM1