Cloud-electronics WP-8W Bedienungsanleitung

WP-8 and WP-8A Headphone StationsInstallation Guide

WP-8 Installation Guide10Connecting an external amplier and/or speakersThe WP-8 is provided with additional outputs, which can be used to drive exter

WP-8 Installation Guide11socket, and mute when a jack plug is inserted in the socket. The permanent outputs are continuously active.The WP-8’s externa

WP-8 Installation Guide12Connecting loudspeakers – stereo operationConnect the loudspeakers as shown in Fig. 1 if continuous operation is required, or

WP-8 Installation Guide13Connecting loudspeakers – mono operationOutputs may be paralleled if a single mono output is required. Connect the loudspeake

WP-8 Installation Guide14Driving powered loudspeakers or external ampliersA line level signal may be derived from the outputs by the addition of 1k o

WP-8 Installation Guide15OperationThe WP-8 has a 3.5 mm 3-pole jack socket for headphones 1. The WP-8 is suitable for headphones having an impedance

Cloud Electronics Limited140 Staniforth RoadShefeld S9 3HFEnglandTel: +44 (0)114 244 7051Fax: +44 (0)114 242 5462email: [email protected]: www.clou

WP-8 Installation Guide2

WP-8 Installation Guide3ContentsSafety Information ...4Introduction ...

WP-8 Installation Guide4Safety InformationThe Cloud WP-8 contains no active electronics and thus requires no AC or DC voltage supply. Safety precautio

WP-8 Installation Guide5US Versions:The WP-8A is electrically and functionally identical, but the faceplate has different physical dimensions (4.51” x

WP-8 Installation Guide6Top view3121. Headphone socket2. Music source selection switch3. Headphone volume control

WP-8 Installation Guide7Rear view544. IDC connector block for hard-wiring5. Screw-terminal block for external amplier/speaker connection

WP-8 Installation Guide8InstallationMechanicalThe Cloud WP-8 is designed to be wall mounted. It is the same physical size as a UK-style single-gang el

WP-8 Installation Guide9First pass the CAT-5 cable through a suitable hole in the back box. Using an IDC insertion tool, connect it to the 8-way IDC b